Interfaze が拡散型 ASR モデル「diffusion-gemma-asr-small」を公開、6 か国語の並列ノイズ除去デコーダーで音声認識を実現

Interfaze, a young YC’s startup, has open-sourced a new speech recognition model. It is called diffusion-gemma-asr-small. The model transcribes audio through a diffusion decoder, not an autoregressive one. It is described as the first multilingual audio diffusion ASR model. One adapter handles six languages. The research team trained only about 42M parameters on top of a frozen 26B backbone. That is roughly 0.16% of the model’s weights.

Here two terms matter up front. Autoregressive models generate text one token at a time. Diffusion models refine all tokens in parallel. This model uses the diffusion approach for speech-to-text.

TL;DR

Claimed by the Interfaze team, to be the first open-source multilingual diffusion ASR: six languages from a single ~42M-parameter adapter.

Transcribes via DiffusionGemma’s diffusion decoder using uniform, random-token diffusion, not the absorbing <mask> scheme.

Transcription cost scales with denoising steps, not transcript length.

Leads diffusion peers on LibriSpeech (6.6% WER vs Whisfusion’s 8.3%) but trails autoregressive Whisper.

The adapter ships under Apache-2.0; DiffusionGemma (Gemma terms) and whisper-small (MIT) load separately.

What is diffusion-gemma-asr-small?

diffusion-gemma-asr-small is an audio-native ASR model. It converts speech to text using a discrete diffusion decoder. That decoder belongs to DiffusionGemma, Google’s 26B mixture-of-experts model. DiffusionGemma activates 4B parameters, using 128 experts with top-8 routing. It generates text by discrete diffusion instead of autoregression.

The diffusion detail is specific. Most diffusion LLMs use an absorbing <mask> scheme. DiffusionGemma uses uniform, random-token diffusion instead. It fills a fixed-length canvas with random vocabulary tokens. Each step keeps confident predictions and re-randomizes the rest. After a few steps the noise anneals into text.

Interfaze added audio to this text-only model. Out of the box, DiffusionGemma takes text, images, and video. It does not take audio. The repo ships only the trained adapter, about 42M parameters. The frozen backbones download separately from their own repos.

How it works

The model does not feed raw waveforms to the LLM. An early attempt tried exactly that and failed. A frozen LLM has never seen a spectrogram. The embedding space has no notion of formants or phonemes. The model learned to ignore audio and hallucinate fluent nonsense.

The working design uses a frozen whisper-small encoder. It acts only as a feature extractor, not a decoder. Whisper turns 30 seconds of audio into 1500 frames. Each frame holds 768-dimensional acoustic features. A small trainable projector then compresses these frames. It uses conv layers that subsample 8× plus a linear map. The output is 188 “audio tokens” at 2816 dimensions. These tokens scatter into the prompt’s reserved <|audio|> slots. LoRA adapters let the backbone attend to this new modality. The decoder then denoises a 192-token transcript canvas. It runs bidirectionally over roughly 16 steps.

The pipeline, from the model card, is compact:

Copy CodeCopiedUse a different Browser

raw audio ─► whisper-small encoder (frozen) ─► projector (trained, ~19M)

─► scatter into <audio> token slots of DiffusionGemma's encoder

─► DiffusionGemma decoder denoises a 192-token canvas (bidirectional, cross-attends audio)

─► transcript

The training unlock

The first training runs stalled. Loss flatlined near 8. The failure was circular. The projector started random, so its output was noise. Attention then learned to ignore it. Almost no gradient reached the projector. The model never learned.

The fix supervised the projector directly. The research team ran the 188 audio tokens through DiffusionGemma’s frozen lm_head. They applied a CTC loss against the transcript. CTC means Connectionist Temporal Classification. It aligns audio features to text without needing attention.

This sidesteps the standoff. The audio embeddings became linearly predictive of the right words. CTC loss then dropped from 24 to 8.6 in 300 steps. On LibriSpeech test-clean, English WER fell 90% → 52% → 14.6% → 6.6% over ten epochs.

Performance and benchmarks

WER means Word Error Rate, where lower is better. CER means Character Error Rate. The model trained on FLEURS, LibriSpeech, and VoxPopuli. All scores below use the Whisper text normalizer at 16 diffusion steps.

benchmarkmetricscore

LibriSpeech test-clean (en)WER6.6%

FLEURS EnglishWER15.7%

VoxPopuli EnglishWER18.5%

FLEURS HindiCER15.8%

FLEURS MandarinCER29.6%

Against other diffusion or non-autoregressive ASR, it leads.

modelapproachLibriSpeech test-clean

TransFusion (2022)multinomial diffusion~6–7% (proof-of-concept)

Whisfusion (Aug 2025)Whisper-large-v3 + masked diffusion8.3%

diffusion-gemma-asr-small (2026)Whisper-small + DiffusionGemma6.6%

Against autoregressive Whisper, it trails. The team frames this gap as data, not architecture.

benchmarkoursWhisper-smallWhisper-large-v3

LibriSpeech clean6.6%~3.4%~2.0%

FLEURS-en15.7%~9–10%~4–5%

VoxPopuli-en18.5%~9–11%~7–10%

The denoising-step sweep shows a nearly flat curve.

stepsFLEURS-en WERspeed

815.7%14.9× real-time

1615.6%10.3×

3215.2%6.5×

4815.6%4.7×

Going from 8 to 48 steps buys about 0.1 WER point. It costs roughly 3× the latency. The model converges in about 8 parallel passes. That is around 0.7–1.5s of model time for a 10-second clip.

Use cases with examples

Batch transcription pipelines benefit from parallel decoding. Cost is set by denoising steps, not clip length. A 10-second clip needs roughly the same passes as a shorter one.

Multilingual transcription runs from a single adapter. It covers English, German, French, Spanish, Hindi, and Mandarin. Teams avoid loading a separate model per language.

Non-autoregressive ASR research gains a reproducible baseline. The recipe grounds a frozen LLM with a small adapter. Researchers can extend it with more audio or a larger encoder.

How to get started

The model lives on the Hub. It ships the adapter, model.py, audio.py, and a runnable inference.py. DiffusionGemma support needs transformers from main.

Copy CodeCopiedUse a different Browser

pip install torch peft soundfile librosa huggingface_hub \

"transformers @ git+https://github.com/huggingface/transformers.git"

Then transcribe in Python:

Copy CodeCopiedUse a different Browser

import sys, soundfile as sf

from huggingface_hub import snapshot_download

repo = snapshot_download("interfaze-ai/diffusion-gemma-asr-small") # adapter, ~170 MB

sys.path.insert(0, repo)

from inference import load, transcribe

Loads frozen DiffusionGemma-26B + whisper-small + this adapter.

model, tok, fe = load(f"{repo}/diffusion_asr_small.pt", device="cuda")

wav, sr = sf.read("audio.wav") # 16 kHz mono float32

print(transcribe(wav, model, tok, fe, max_steps=16))

A command-line path also works from inside the downloaded repo:

Copy CodeCopiedUse a different Browser

python inference.py audio.wav

The max_steps argument trades speed for accuracy. The team notes 8 is near-best and fastest. The default is 16. The base models load under their own licenses: DiffusionGemma under Gemma terms, whisper-small under MIT.

Interactive Explainer

Check out the Model weights and Technical details. Also, feel free to follow us on Twitter and don’t forget to join our 150k+ML SubReddit and Subscribe to our Newsletter. Wait! are you on telegram? now you can join us on telegram as well.

Need to partner with us for promoting your GitHub Repo OR Hugging Face Page OR Product Release OR Webinar etc.? Connect with us

The post Interfaze Ships diffusion-gemma-asr-small, an Open-Source Diffusion ASR Model Transcribing Six Languages via DiffusionGemma’s Parallel Denoising Decoder appeared first on MarkTechPost.